Accueil Publications Papiers de conférences

José Horta, Daniel Kofman, David Menga, Mathieu Caujolle

Proc. of the ACM e-Energy Conference, Karlsruhe, Germany, June 2018.
DOI: 10.1145/3208903.3208937

Abstract: The limited capacity of distribution grids for hosting renewable generation is one of the main challenges towards the energy transition. Local energy markets, enabling direct exchange of energy between prosumers, help to integrate the growing number of residential photovoltaic panels by scheduling flexible demand for balancing renewable energy locally. Nevertheless, existing scheduling mechanisms do not take into account the phases to which households are connected, increasing network unbalance and favoring bigger voltage rises/drops and higher losses. In this paper, we reduce network unbalance by leveraging market transactions information to dynamically allocate houses to phases using solid state switches. We propose cost effective mechanisms for the selection of households to switch and for their optimal allocation to phases. Using load flow analysis we show that only 6% of houses in our case studies need to be equipped with dynamic switches to counteract the negative impact of local energy markets while maintaining all the benefits. Combining local energy markets and dynamic phase switching we improve both overall load balancing and network unbalance, effectively augmenting DER hosting capacity of distribution grids.

Sawsan Al Zahr

[Invited paper] Proc. of the IEEE MENACOMM Confrence, Jounieh, Lebanon, Apr. 2018
DOI: 10.1109/MENACOMM.2018.8371044

Abstract: Along with the growing penetration of renewable energy sources, demand side management (DSM) is becoming a key component of future energy systems such as smart grids. DSM aims at balancing the demand for power with intermittent renewable energy sources such as wind and solar units. DSM deploys various mechanisms to influence customer’s capability and willingness to modify their power consumption according to the utility’s energy production and the distribution capacity. DSM aims at either saving energy in sustainable manner (i.e. energy response) or/and shifting the time of energy use to off-peak hours (i.e. demand response). Indeed, DSM does not necessarily reduce the total customer’s power consumption but reshapes consumption patterns. Hence, DSM is expected to reduce the need for investments in networks and power plants in order to meet peak demands. In this paper, we propose an advanced demand response (DR) solution for individual households. Considering a household equipped with various domestic loads, we aim at optimally scheduling the day-ahead power consumption under timevariable rates while taking advantage of modular and deferrable loads, e.g. electric vehicle. Our proposal is numerically illustrated through real-life scenarios, elaborated using an existing simulator of human behavior regarding power consumption.

Rayhana Bouali Baghli, Elie Najm, Bruno Traverson
Proc. of the 6th International Conference on Model-Driven Engineering and Software Development (MODELSWARD), Jan. 2018.

Abstract: In the context of the Internet of Things (IoT), it is necessary to design services that are loosely coupled to the objects on which they act. We call these loosely coupled services generic services. Based on a previous work that defines a three-levelled architecture for the IoT, we first propose a declarative approach to the design generic services for the IoT. Then, based on this declarative description, we define service orchestrators which are high level services that are able to manage access conflicts of services to connected objects. Next, we describe consistency rules to check validity of a generic service or an orchestrator. Finally, we illustrate our approach with use cases around services in a smart home.

Sawsan Al Zahr, Elias A. Doumith, Philippe Forestier

Proc. of the IEEE Globecom Confrence, Singapore, Singapore, Dec. 2017
DOI: 10.1109/GLOCOM.2017.8255068

Abstract: As the global energy policy is changing from a demand-driven to a supply-driven approach, demand side management (DSM) is becoming a key component of future energy systems. Indeed, it helps power grids’ operators to balance the demand for power with intermittent renewable energy sources such as wind and solar units. DSM consists in optimizing/adapting the power consumption to meet the production through various methods such as improving the energy efficiency by using better equipment and materials, implementing demand response (DR) solutions, etc. DSM mechanisms do not necessarily reduce the total power consumption, but reshape the consumption pattern. Hence, DSM is expected to reduce the need for investments in networks and power plants in order to meet peak demands. In this paper, we propose an advanced DR solution for individual households. Considering a household equipped with various domestic loads, we aim at optimally scheduling the day-ahead power consumption under time-variable rates while taking advantage of modular and deferrable loads, e.g., electric vehicle. For this purpose, we propose an exact approach to solve the problem of energy management within a household under both system’s and user’s constraints. Our proposal is numerically validated through real- life scenarios, elaborated using an existing simulator of human behavior regarding power consumption.

José Horta, Daniel Kofman, David Menga, Alonso Silva

Proc. of the IEEE Globecom Confrence, Singapore, Singapore, Dec. 2017
10.1109/SmartGridComm.2017.8340728

Abstract: Future electricity distribution grids will host a considerable share of variable renewable energy sources and local storage resources. Moreover, they will face new load structures due for example to the growth of the electric vehicle market. These trends raise the need for new paradigms for distribution grids operation, in which Distribution System Operators will increasingly rely on demand side flexibility and households will progressively become prosumers playing an active role on smart grid energy management. However, in present energy management architectures, the lack of coordination among actors limits the capability of the grid to enable the mentioned trends. In this paper we tackle this problem by proposing an architecture that enables households to autonomously exchange energy blocks and flexibility services with neighbors, operators and market actors. The solution is based on a blockchain transactive platform. We focus on a market application, where households can trade energy with their neighbors, aimed to locally balancing renewable energy production. We propose a market mechanism and dynamic transport prices that provide an incentive for households to locally manage energy resources in a way that responds to both prosumer and operator needs. We evaluate the impact of such markets through comprehensive simulations using power flow analysis and realistic load profiles, providing valuable insight for the design of appropriate mechanisms and incentives.

Rayhana Bouali Baghli, Elie Najm, Bruno Traverson

Proceedings of the 20th International Enterprise Distributed Object Computing Workshop (IEEE). Sep. 2016
DOI: 10.1109/EDOCW.2016.7584391

Abstract: We propose a data-centric three leveled modeling architecture in an effort towards a Model Driven approach of services for the Internet of Things (IoT): a resources level, an artifacts level and a semantic level. In this architecture, the resources level abstracts all important pieces of information describing real objects as resources. The artifacts level allows to collect all objects and contexts information necessary for the execution of a given service. The semantic level introduces semantic notions to the architecture. So, data and actions are named in a standardized naming and the rules facilitate the interaction of the system with the non-expert users. We illustrate our architecture on a small example in which we present all three levels.

Joel Mathias, Rim Kaddah, Ana Bušić, Sean Meyn

Proceeddings of the 49th Hawaii International Conference on Systems Sciences (IEEE). Mar. 2016.
DOI: 10.1109/HICSS.2016.312

Abstract: In discussions at the 2015 HICSS meeting, it was argued that loads can provide most of the ancillary services required today and in the future. Through load-level and grid-level control design, high-quality ancillary service for the grid is obtained without impacting quality of service delivered to the consumer. This approach to grid regulation is called demand dispatch: loads are providing service continuously and automatically, without consumer interference. In this paper we ask, what intelligence is required at the grid-level? In particular, does the grid-operator require more than one-way communication to the loads? Our main conclusion: risk is not great in lower frequency ranges, e.g., PJM’s RegA or BPA’s balancing reserves. In particular, ancillary services from refrigerators and pool-pumps can be obtained successfully with only one-way communication. This requires intelligence at the loads, and much less intelligence at the grid level.

Rim Kaddah, Daniel Kofman, Fabien Mathieu, Michal Pioro

Proceedings of the 11th International Conference on Innovations in Information Technology (IEEE). Nov. 2015.
DOI: 10.1109/INNOVATIONS.2015.7381509

Abstract: The Internet of Things (IoT) paradigm brings an opportunity for advanced Demand Response (DR) solutions. Indeed, it enables visibility and control on the various appliances that may consume, store or generate energy within a home. It has been shown that a centralized control on the appliances of a set of households leads to efficient DR mechanisms; unfortunately, such solutions raise privacy and scalability issues. In this paper we propose an IoT-based DR approach that deals with these issues. Specifically, we propose and analyze a scalable two levels control system where a centralized controller allocates power to each house on one side and, each household implements an IoT- based DR local solution on the other side. A limited feedback to the centralized controller allows to enhance the performance with little impact on privacy. The solution is proposed for the general framework of capacity markets.

Ziad Ismaïl, Jean Leneutre, Alia Fourati

Security of Industrial Control Systems and Cyber Physical Systems (Springer). Pages: 157-167, Sep. 2015.
DOI: 10.1007/978-3-319-40385-4_11

Abstract: The improved communication and remote control capabilities of industrial control systems equipment have increased their attack surface. As a result, managing the security risk became a challenging task. The consequences of attacks in an industrial control system can go beyond targeted equipment to impact services in the industrial process. In addition, the success likelihood of an attack is highly correlated to the attacker profile and his knowledge of the architecture of the system. In this paper, we present the Attack Execution Model (AEM), which is an attack graph representing the evolution of the adversary’s state in the system after each attack step. We are interested in assessing the risk of cyber attacks on an industrial control system before the next maintenance period. Given a specific attacker profile, we generate all potential attacker actions that could be executed in the system. Our tool outputs the probability and the time needed to compromise a target equipment or services in the system.